CMYK vs RGB explained for print: when each is right for offset, digital, DTG, sublimation and embroidery, and how to avoid color shifts.
How the two color models work
RGB mixes red, green and blue light. A screen starts dark and adds light, so more light means a brighter color and all three at full strength make white. Phones, monitors and most customer uploads are RGB.
CMYK mixes cyan, magenta, yellow and black ink on paper or another surface. Paper starts white and ink absorbs light, so more ink means a darker color. The K stands for key, the black plate that adds depth and sharp text.
Because light and ink build color in opposite ways, each model can reproduce colors the other cannot. The range of colors a model or device can show is called its gamut, and RGB screens have a larger gamut than CMYK ink in the saturated blues, greens and oranges.
Why bright colors go dull after conversion
When a file is converted from RGB to CMYK, every color outside the printer’s gamut is moved to the closest color the inks can make. A vivid electric blue or neon green on screen becomes a deeper, flatter version in print. Nothing is wrong with the file; the ink simply cannot reach that color.
You can plan for this instead of being surprised by it. Preview the artwork with the printer’s profile (soft proofing) before approving it, choose brand colors from a printed swatch book, and where an exact brand color matters, ask the printer about a spot ink or an extended-gamut process.
Color profiles you will meet
| Profile | Where it is used | What to know |
|---|
| sRGB | Screens, web and most customer uploads | Assume sRGB when an RGB file has no profile attached |
| Adobe RGB (1998) | Photography and some design work | Wider than sRGB; convert to sRGB for web, or to CMYK for print |
| Coated FOGRA39 (ISO Coated v2) | Offset on coated paper, mostly Europe | Typical request from European printers |
| GRACoL / SWOP | Offset printing in the US | Printers name the exact version they want |
| Uncoated profiles | Uncoated stock | Ink soaks in, so colors look duller and darker than on coated paper |
Which mode for which print process
| Process | Usual color mode | Note |
|---|
| Offset and digital paper printing | CMYK, plus spot colors if used | Convert with the printer’s profile before sending |
| Large-format inkjet | RGB or CMYK | Many RIPs convert for you; ask which they prefer |
| DTG and DTF | RGB or CMYK | The RIP applies its own profile; a white underbase is added for dark garments |
| Screen printing | Spot colors, one screen per ink | Artwork is separated by color, not mixed from CMYK |
| Sublimation | RGB or CMYK through the RIP | Colors shift in the heat press, so test a swatch first |
| Embroidery | Thread colors | Match to a thread chart; the screen color is only a guide |
Getting black right
Black is where beginners most often go wrong. Small text should be 100% K only, because a text made from four inks can look blurry if the plates sit a fraction out of register. Large black areas often use a rich black, which adds some cyan, magenta and yellow under the K for a deeper tone. One common recipe is about C60 M40 Y40 K100, but printers differ, so use their number.
Also respect the total ink limit, which is the sum of all four inks at any point. Coated stock typically tolerates about 300% and uncoated stock noticeably less. Too much ink dries slowly and can smear or set off onto the next sheet.
A color preflight routine
- Ask the printer for the mode, the profile and the maximum total ink in writing
- Convert the master RGB artwork to CMYK once, at export, not repeatedly
- Check small text and thin lines are single-color, not four-color
- Look for out-of-gamut colors and decide whether to accept the shift
- Print one test swatch on the real material before a large run
- Keep the original RGB master so you can re-export for another process
How a web-to-print workflow should handle color
Customers pick colors on a screen in RGB, so the system should keep one master design and convert only at export, using the profile the print process needs. It should also warn when a chosen color will shift noticeably, so the customer is not surprised later.
Prexaya’s designer shows print areas and safe zones while the customer works and exports artwork for the order as PDF, SVG or PNG. Because every printer’s specification differs, set the export to match your shop’s requirements, and see the print-ready PDF generator page for how the output is prepared.
How it works
- Get the spec. Ask the printer for the color mode, profile and ink limit.
- Design once. Keep a single master design for every process.
- Convert at export. Apply the printer’s profile only when the file is exported.
- Test a swatch. Print a sample on the real material before the full run.
Related
Frequently asked questions
Is CMYK or RGB better for printing?
CMYK is the standard for offset and most paper printing, because the press mixes cyan, magenta, yellow and black ink. Some digital, DTG, DTF and sublimation workflows accept RGB and convert it in the RIP, so always follow the printer’s file spec.
Why do my printed colors look dull?
Bright RGB colors, especially vivid blues, greens and oranges, are outside the CMYK gamut. Conversion moves them to the nearest printable color, which looks flatter. Soft-proof early and choose colors from a printed swatch.
Should I convert to CMYK myself or let the printer do it?
Ask the printer. Many want CMYK files made with their own profile, while others prefer RGB and convert in the RIP. Converting twice, by you and then by them, can shift colors again.
What is rich black?
A black made from the K ink plus some cyan, magenta and yellow, used for large solid areas to look deeper. Use plain 100% K for small text and thin lines.
What about embroidery?
Embroidery uses thread, not ink. Match the design to a thread chart and treat the on-screen color as a guide only.
Can Prexaya export both?
Prexaya exports artwork as PDF, SVG or PNG. Choose the output your printer asks for and test one order end to end.